Club Car DS Dash Instructions:



Step 1: Remove old steering wheel


Step 2: Remove key switch plate from the original dash area


Step 3: Slide new dash on over steering column


Step 4: Remove key switch from old mounting point and remount into new dash 


Note: Some newer models may require a spacer between the key switch and dash in order to mount the key switch (spacer not provided, however a small plastic coupling works great)


Step 5: Fit new dash cover on to original aluminum dash trim


Note: There are small flat areas notched around the front edges of the dash to be used as the mounting points


Step 6: Drill one small pilot hole once dash is in place, then insert the first screw


Step 7: Drill the remaining pilot holes and secure with the screws providedNote: It is suggested to drill one pilot hole at a time and insert one screw at a time to ensure proper fit before drilling the next hole


Step 8: Once dash is secured re-install steering wheel